FAQ

Water Blob Set-up & Take-down Instructions

1. Prepare to inflate the water blob by laying it flat on a smooth surface.

2. We recommend inflating with a shop-vac if electricity is available, or something like a leaf-blower when not available. Inflate until water blob is about 2/3 to 3/4 full of air.

3. Slowly guide water blob onto water, making sure path is free of sticks or sharp objects.

4. Anchor the water launch by tying ropes with 30-50 pound weights to bungees provided on sides of the blob. Do not tie directly to the strap. Make sure anchor points are snug, but not over tight. For best results, anchors should touch the bottom of the lake or body of water.

5. Put your first”launchee” on the water blob. They should sit 4-6 inches above the waterline. Release air if needed.

6. Have fun!

7. When its time to pack up the water blob and return it, be sure to not drag the water blob on the ground as you are responsible for any damage that occurs.

8. Make sure that the water blob is dry before it is rolled up and packed away.

UTAH BUBBLE SPORTS is located within the HILL INSURANCE & INVESTMENTS building located at: